SUBMERSIBLE PUMP ACCESSORIES
BRASS RELIEF VALVES Call for Pricing
Economy Series
| Size | Description | |
| 1/2 Inch | 75 PSI Setting | |
| 3/4 Inch | 75 PSI Setting |
Heavy Duty Series
Factory set at 30, 65 or 75 psi. Composition disc on brass seat. 180°F max. temp. Field adjusting not recommended.
| Size | PSI | |
| 1/2 | 30# | |
| 1/2 | 75# | |
| 3/4 | 30# | |
| 3/4 | 75# | |
| 1 | 30# | |
| 1 | 75# | |
| 1 1/4 | 30# | |
| 1 1/4 | 65# | |
| 1 1/2 | 30# | |
| 1 1/2 | 65# | |
| 2 | 30# | |
| 2 | 65# |
SANITARY WELL SEALS Call for Pricing
Sanitary Well Seals
Two piece, cast iron construction. Rubber composition seal.
459S-One Pipe
| Size | |
| 4x1 | |
| 4x1 1/4 | |
| 4 1/2x1 1/4 | |
| 5x1 | |
| 5x1 1/4 | |
| 5 5/8 x 1 | |
| 5 5/8x1 1/4 | |
| 6x1 | |
| 6x1 1/4 | |
| 6x1 1/2 | |
| 6x2 |
1/4" PRESSURE GAUGE Call for Pricing
1/4" Pressure Gauge
| Part # | Description | |
| 3129-404 | 0-100 lbs., 2" dial, 1/4 Brass steam, steel case, vertical |
BRASS CHECK VALVES Call for Pricing
Brass Check Valves - Spring loaded, 400 PSI working pressure
| Part # | Size | Description | |
| 6814-005 | 3/4" | Brass finish, no tapping | |
| 6814-006 | 1" | Brass finish, no tapping | |
| 6814-007 | 1-1/4" | Brass finish, no tapping | |
| 6814-008 | 1-1/2" | Brass finish, no tapping | |
| 6814-009 | 2" | Brass finish, no tapping | |
| 1" | FIP X FIP, tapped 1/8" and 1/4" | ||
| 1-1/4" | FIP X FIP, tapped 1/8" and 1/4" | ||
| 1-1/2" | FIP X FIP, tapped 1/8" and 1/4" | ||
| 2" | FIP X FIP, tapped 1/8" and 1/4" |
PVC SUBMERSIBLE ELECTRIC CABLE-YELLOW INSULATION
Call for Pricing
| Size | Description | |
| FYG 14/2 | Flat Yellow w/ground | |
| FYG 12/2 | Flat Yellow w/ground | |
| FYG10/2 | Flat yellow w/ground | |
| FYG 14/3 | Flat Yellow w/ground | |
| FYG 12/3 | Flat Yellow w/ground | |
| FYG 10/3 | Flat Yellow w/ground | |
| FYG 8/3 | Flat Yellow w/ground | |
| JCG 12/3 | Heavy Duty Jacketed w/ground | |
| JCG 10/3 | Heavy Duty Jacketed w/ground | |
| JCG 8/3 | Heavy Duty Jacketed w/ground | |
| JCG 6/3 | Heavy Duty Jacketed w/ground | |
| JCG 4/3 | Heavy Duty Jacketed w/ground | |
| JCG 2/3 | Heavy Duty Jacketed w/ground | |
| JCG 0/3 | Heavy Duty Jacketed w/ground | |
| JCG 00/3 | Heavy Duty Jacketed w/ground |
WIRE SELECTION GUIDE
| Single Phase | Copper Wire | Size | |||
| 230 Volt | 12 | 10 | 8 | 6 | 4 |
| 1 HP | 400 | 630 | 990 | ||
| 1-1/2 HP | 310 | 480 | 770 | 1200 | |
| 2 HP | 250 | 390 | 620 | 970 | |
| 3 HP | 190 | 300 | 470 | 750 | 1190 |
| 5 HP | 280 | 450 | 710 | ||
| 7 1/2 HP | 310 | 490 |
HEAT SHRINK SPLICE KITS Call for Pricing
Heat Shrink Splice Kits
| #4 Splice Kit | |
| #6 Splice Kit | |
| #8 Splice Kit | |
| #10,12,14 Splice Kit |
AIR RELEASES Call for Pricing
Air Releases
| AVHAE | Robert Shaw |
PRESSURE SWITCHES Call for Pricing
Pressure Switches
Pressure switches are rated to 1.5 HP 115V 1 phase and/or 2 HP 230V 1 phase or up to 3 HP 230V 3 phase. Submersible pumps above 2 HP 1 phase require deluxe control boxes with these switches.
| Normal Size | 1/2 HP - 3 HP | |
| Heavy Size | 3 HP & Above |
